ALPHACAM_V2013中英文安装说明书

: installation guide

Vero Software Limited www.alphacam.com 1 of 15 Contents

System Requirements ....................................................................................................................................... 2 Overview........................................................................................................................................................... 3 Software and Installation ................................................................................................................................... 3 Preparation .................................................................................................................................................... 3 The Alphacam “Key” ...................................................................................................................................... 3 You Are Now Ready to Begin ........................................................................................................................ 3 The AutoPlay Menu.................................................................................................................................... 3 Language Selection ................................................................................................................................... 5 The Installation Wizard ............................................................................................................................... 5 Running Alphacam ........................................................................................................................................ 7 Standalone License Installation ......................................................................................................................... 8 Activating or Updating a Vero CLS License .................................................................................................... 8 To Activate or Update Your Standalone License ......................................................................................... 8 Network License Installation ............................................................................................................................ 11 Installing Your Network License Using CLS ................................................................................................. 11 To Setup the Server ................................................................................................................................. 11 To Install the License File ......................................................................................................................... 11 Configuring Network Licenses on the Client PC ............................................................................................... 14 Configuring the Client PC Using CLS ........................................................................................................... 14 IMPORTANT NOTES .................................................................................................................................. 15 译： ：安装指南

维罗软件有限公司www.alphacam.com151 内容

系统要求....................................................................................................................................... 2

Overview........................................................................................................................................................... 3 软件和安装................................................................................................................................... 3 准备.................................................................................................................................................... 3 该Alphacam“钥匙”...................................................................................................................................... 3 你现在就可以开始........................................................................................................................ 3 自动播放Menu.................................................................................................................................... 3 语言选择...................................................................................................................................5 安装向导...............................................................................................................................5

运行Alphacam........................................................................................................................................ 7 单机许可证安装......................................................................................................................... 8 激活或更新维罗CLS许可证........................................... .................................................. 8....... 要激活或更新您的单机许可证........................................... ..............................................8 网络许可安装............................................................................................................................ 11 安装网络许可使用CLS............................................ .................................................. ...11 要设置服务器................................................................................................................................. 11 安装许可证文件......................................................................................................................... 11

配置网络许可证的客户端PC上........................................... .................................................. 14.. 配置客户端PC使用CLS........................................................................................................... 14 重要提示.................................................................................................................................. 15

: installation guide

Vero Software Limited www.alphacam.com 2 of 15 System Requirements

1.0GHz, 32 bit Intel Pentium compatible processor (2.0GHz Intel Pentium 4 or better recommended)

Windows XP SP3 (XP Professional recommended), Windows Vista SP2 (Vista Business or Vista Ultimate recommended), Windows 7 (Home, Professional or Ultimate recommended)

Alphacam will install and run on the 'Home' editions of Windows XP and Windows Vista. However, this is not recommended and we cannot guarantee to fix any Alphacam issues specifically related to these operating systems.

Alphacam is not supported on Windows 7 Starter Edition.

* Windows is a registered trademark of Microsoft Corporation in the United States and other countries

1GB RAM (2GB or more highly recommended for 32-bit OS, 4GB for 64-bit OS)

OpenGL? compatible with 64MB on-board memory (256MB or more recommended)

1024x768 resolution (1280x1024 or higher recommended) Hard Disk Space

1GB free hard disk space (minimum)

DVD drive for software installation

2 button, 3 button, or 2 button with wheel (recommended) Windows compatible mouse

USB 1.1 or 2.0 port for single user security key support

TCP/IP required for network security support : installation guide

Vero Software Limited www.alphacam.com 3 of 15 Overview

This document contains step by step instructions and information on how to install the Alphacam software and CLS software licensing. Software and Installation Preparation

Please make sure you read this entire document prior to installation of the Alphacam software.

Before you start the installation process, it is recommended that you exit (close) all running applications. Closing all running applications prior to installing any new program will insure that you get a clean installation. The Alphacam “Key”

译： ：安装指南

Vero软件有限公司15 www.alphacam.com2 系统要求 处理器

1.0GHz的32位英特尔奔腾兼容处理器（2.0GHz的英特尔奔腾4或推荐更好） 操作系统

的Windows XP SP3（XP专业版建议）中，Windows Vista SP2（Vista商业版或Vista 终极推荐）时，Windows7（家庭版，专业版或旗舰版推荐）

Alphacam将安装和运行在Windows XP和Windows Vista中的“家”的版本。但是，此 不推荐，我们不能保证解决具体涉及到这些任何Alphacam问题 操作系统。

Alphacam不支持Windows7入门版。

* Windows是微软公司在美国和其他国家的注册商标。 内存

1GB RAM（2GB或以上强烈推荐32位操作系统，4GB为64位操作系统） 视频卡

用的OpenGL?64MB板载内存（推荐256MB以上）兼容 监视器

1024×768的分辨率（1280×1024或更高推荐） 硬盘空间

1GB的可用硬盘空间（最小） 光盘驱动器

DVD驱动器用于软件安装 定位设备

2键，3键或2键与滚轮（推荐）的Windows兼容的鼠标 端口

USB1.1或2.0端口，单个用户的安全密钥的支持 网络

需要对网络安全性的支持TCP/ IP ：安装指南

Vero软件有限公司15 www.alphacam.com3 概观

本文件包含有关如何安装Alphacam软件一步一步的指示和信息 CLS软件许可。 软件和安装 准备

请务必阅读整个文档之前安装Alphacam软件。

在您开始安装过程，建议您退出（关闭）所有正在运行的应用程序。

关闭所有正在运行的应用程序，然后再安装任何新的计划将确保你得到一个干净的安装。 该Alphacam“钥匙”

If you received a USB key, please do not insert the security key into the USB port until the installation has completed and the PC has rebooted.

If you have not received a USB key, but are upgrading from a previous version of Alphacam and already have a key, you will continue to use your existing key. It is recommended that you remove your existing key until the installation has completed and the PC has rebooted.

If you did not receive a USB key and will be using a “keyless” standalone license, this section does not apply. Also, if you have purchased a network license of Alphacam, you may not have received a key. Please see the Network License Installation section for more information.

If using an existing legacy DESkey dongle, DESkey drivers are not installed during the Alphacam installation process. However, the driver installation program is provided in the Support\\DesKey folder on the Alphacam installation disc. These drivers can also be downloaded from the Downloads area on the DESkey web site (www.deskey.co.uk). If these drivers are needed, they must be installed manually after the Alphacam installation has completed.

You Are Now Ready to Begin

The AutoPlay Menu

Insert the Alphacam installation disk into the PC’s disk drive. If your PC is configured to AutoPlay CDs/DVDs, the AutoPlay Menu will appear after a few seconds.

如果您收到一个USB密钥，请不要将安全密钥插入USB端口，直到安装有 完成与PC已经重新启动。

如果您没有收到一个USB密钥，但是从以前版本的Alphacam的升级，而且已经有 键，您将继续使用现有的密钥。我们建议您删除现有的密钥，直到 安装已完成，PC重新启动。

如果您没有收到一个USB密钥，将使用“钥匙”独立的许可证，这部分确实 不适用。另外，如果您购买Alphacam的入网许可证，你可能没有收到 键。请参见更多信息网络许可安装部分。

如果使用的是现有的传统DESkey加密狗，在Alphacam过程中没有安装DESkey司机 安装过程。但是，驱动程序的安装程序的Support \\ DesKey文件夹中提供 在Alphacam安装光盘。这些驱动程序也可以从下载区下载

在DESkey网站（www.deskey.co.uk）。如果需要这些驱动程序，必须将它们安装 手动后Alphacam安装已完成。 你现在就可以开始 自动播放菜单

将Alphacam安装光盘插入电脑的磁盘驱动器。如果你的电脑配置为自动播放CD / DVD光盘， 几秒钟后自动播放菜单会出现。

: installation guide

If the AutoPlay Menu does not appear automatically, open My Computer, double-click the disk drive that contains the Alphacam software and then double-click StartHere.hta to invoke the menu. Or, if asked to confirm the AutoPlay via the dialog shown below, click Run StartHere.hta. 译： ：安装指南

如果自动播放菜单没有自动出现，打开我的电脑，双击磁盘驱动器 包含Alphacam软件，然后双击StartHere.hta以调用菜单。

或者，如果要求确认通过如下所示的对话框自动播放，单击运行StartHere.hta。

Please see the CLS help file for more information. To Activate or Update Your Standalone License

1. If you have an Alphacam USB key, ensure that it’s plugged in now. If you do not have a USB key, simply proceed to step 2.

2. Ensure that the Client License Server (CLS) is running. When running, the CLS icon (a yellow key) appears in the Windows Notification Area.

3. Right-click on the CLS icon and select License Manager

：安装指南

Vero软件有限公司15 www.alphacam.com8 单机许可证安装

激活或更新维罗CLS许可证

独立CLS许可证激活在互联网上。如果你没有上网，请 继续遵循这些说明，并参考说明在下面的步骤6。 一旦软件被安装在PC上，你只能激活您的许可证。 请参阅CLS帮助文件的详细信息。 要激活或更新您的单机许可证

1.如果你有一个Alphacam USB密钥，确保它插在现在。如果你没有一个USB密钥， 简单地继续执行步骤2。

2.确保客户端许可证服务器（CLS）正在运行。运行时，CLS图标（黄色键） 出现在Windows通知区域。

在CLS图标3.右键单击并选择许可证管理

3. Right-click on the CLS icon and select License Manager （译：在CLS图标3.右键单击并选择许可证管理）

If you have installed the Part Modeler after installing Alphacam, it is possible that your CLS menu may look like the image shown below.

（译：如果您已经安装Alphacam后安装的部分建模，它可能是您的CLS菜单 可能看起来像下面所示的图像。）

This can be fixed by merging the appropriate .reg file located in the Support folder on the Alphacam DVD. If running a 32-bit version of Windows, simply double-click the PartModeler_CLS_Fix_x86.reg file and click Yes if asked to verify. If running a 64-bit version of Windows, double-click the PartModeler_CLS_Fix_x64.reg file instead.

（译：这可以通过固定合并位于Support文件夹上Alphacam适当的.reg文件 DVD。如果运行的是32位版本的Windows，只需双击PartModeler_CLS_Fix_x86.reg 文件并单击是如果要求进行验证。如果运行的是64位版本的Windows，双击 PartModeler_CLS_Fix_x64.reg文件代替。）

4. Select Standalone in the License Server list and then click the Install License button 译：

4.许可证服务器列表中选择独立，然后单击安装许可证按钮）

5. Type in the servercode you received from your supplier (as specified on your delivery note), ensure that Request License File is selected, and click Next 译：

5.在您从供应商收到（作为您的交货单中指定）的servercode，确保 申请许可文件被选中，然后单击下一步）

6. Verify your servercode, enter your email address (optional) and click Next 译：

6.验证您的servercode，输入您的电子邮件地址（可选），然后点击下一步

: installation guide

Please note that online activation is the quickest method to activate your standalone license. If your PC does not have Internet access, follow these steps to activate your license: 1. Click the No Internet Available button （译：：安装指南

请注意，在网上激活，激活你的独立许可证的最快方法。如果 你的电脑没有上网，请按照下列步骤来激活许可证：

1.单击无Internet访问按钮）

2. Notepad opens, displaying instructions on how to download the license, together with the

lock code and servercode information.

3. Save the text file to your hard disk using the default file name of LicenseDetails.txt. 4. Copy it to the PC that has Internet access (or take a printout with you). 5. On the PC with Internet access, follow the instructions in LicenseDetails.txt. 译：

2.记事本打开，与显示有关如何下载许可指令，一起 锁码和servercode信息。

3.使用LicenseDetails.txt的默认文件名保存的文本文件到您的硬盘。 4.将其复制到具有互联网接入（或采取打印你）的PC。 5.在PC与互联网接入，按照LicenseDetails.txt的说明。

7. Click Finish to submit and finalize the license request （译： 7.单击完成提交，并最终确定许可申请）

8. Confirmation message is display upon activation （译：8.确认消息是在激活显示器）

: installation guide

Vero Software Limited www.alphacam.com 11 of 15 Network License Installation

For network license implementation, the Sentinel License Manager must first be installed onto a network server. This can be done via the steps below. Installing Your Network License Using CLS

This document refers to the initial setup of network licensing. If you are updating your network licenses following an annual maintenance renewal, or after purchasing additional software modules, please refer to the network_UpdateLicenseFile.pdf document located in the Sentinel RMS Licensing\\Quick Reference Guides folder on the installation disc.

The Sentinel RMS License Server must not be installed on a virtual server if you are using keyless

licensing. Sentinel RMS network licenses can only be installed on virtual servers provided they are locked to a SafeNet Computer ID USB key.

If you are using a keyed network license, ensure that the key is attached to the server. To Setup the Server

1. Insert the Alphacam installation disc and browse to the disk drive via Windows Explorer.

2. Run (double-click) the InstallLM.bat file located in the disc’s root folder (e.g. D:\\InstallLM.bat) to start the Sentinel License Manager install. Alternatively, you can browse to the Sentinel_RMS_Licensing\\License_Manager_Installation folder

(e.g. D:\\Sentinel_RMS_Licensing\\License_Manager_Installation) and double-click the Setup.exe file within that folder to start the installation process. To Install the License File

There are two methods of installing the license file on the server:

– From the CLS License Manager. Note that this option cannot be used for the installation of

redundant license files.

– From WlmAdmin.exe

Option 1 – Using the License Manager

You can install the licenses on the license server from a CLS that is installed on either the server or a client PC (with Administrator Mode enabled).

1. Right-click on the CLS icon and select License Manager 译： ：安装指南

Vero软件有限公司15 www.alphacam.com11 网络许可安装

对于网络许可的实施，哨兵许可证管理必须首先安装到网络 服务器。这可以通过下面的步骤来进行。 安装网络许可使用CLS

本文指的是网络许可的初始设置。如果要更新您的网络 下面的年度维护续订许可证，或购买额外的软件模块后， 请参阅位于哨兵的RMS network_UpdateLicenseFile.pdf文件 许可的安装光盘上的\\快速参考指南文件夹。

在虚拟服务器上，如果您使用的是无钥匙哨兵RMS许可证服务器不能安装 授权。圣天诺RMS网络许可证只能在虚拟服务器上安装提供他们 锁定到SafeNet的计算机ID USB密钥。

如果您使用的是密钥的入网许可证，确保密钥连接到服务器。 要设置服务器

1.将Alphacam安装光盘，并浏览到通过Windows资源管理器的磁盘驱动器。

2.运行（双击），位于光盘的根文件夹中InstallLM.bat文件（如D：\\ InstallLM.bat）启动 哨兵许可证管理器安装。另外，您也可以浏览到

Sentinel_RMS_Licensing\\ License_Manager_Installation文件夹

（如D：\\ Sentinel_RMS_Licensing\\ License_Manager_Installation），然后双击Setup.exe文件 该文件夹中启动安装程序。 安装许可证文件

有安装在服务器上的许可文件的方法有两种：

选项1 - 从CLS许可证管理。需要注意的是，不能用于安装该选项

多余的许可文件。

选项2 - 从WlmAdmin.exe 选项1 - 使用许可证管理

您可以从安装服务器或客户端PC上的CLS安装许可证服务器上的许可证 （以管理员模式下启用）。

1、在CLS图标1.右键单击并选择许可证管理

2. On the Server menu, click Search Network to list the Sentinel RMS server(s). Select the server you wish to connect to and click Change Active Server. Confirm that you wish to change the active server, and close the dialog.

3. Select your chosen server in the list and click the Install License button. 译：

2.在服务器菜单，单击搜索网络以列出哨兵RMS服务器（S）。选择服务器， 要连接并单击更改活动服务器。确认您要更改的活动服务器， 并关闭对话框。

3.在列表中选择您所选择的服务器，然后单击安装许可证按钮。

4. In the dialog that opens, you have the option to request your license file over the Internet or to browse to a file that you have already downloaded or received by email. To request a license file over the Internet

1. Type in or copy-and-paste your Servercode and click Next

2. Click Request License File to request a license file from the Vero server over the Internet 3. In the license activation dialog, check the details are correctly displayed and click Next To install a license file that has been sent to you

1. Type in or copy-and-paste your Servercode and click Next 2. Click Use License File

3. Browse for and select the license file (the license file will be named .one, i.e. 1234-4567-1234-4567-1234-4567.one for example) 4. Click Next

5. In the confirmation dialog, click Finish to complete the installation Your licenses are now installed and ready to use. Option 2 – Using WlmAdmin.exe

1. The first step is to generate the lock code for the server. From you installation DVD, run the file: \\Sentinel RMS Licensing\\Generate Lock Code\\GenerateLockCode.exe

Note the lock code in the dialog that opens. Alternatively click Save to save to a file.

If the GenerateLockCode.exe fails, please read the GenerateLockCodeHelp.txt file located in that same folder.

2. You now need to obtain a license keyfile by submitting your lock code online. Follow the link in your delivery note. Your Servercode and Customer ID will be displayed automatically. Type or paste in your Lock Code. Optionally, add your email address and then click Generate License. Go to step 4.

3. If you are a returning customer and we already have your lock code on file you can go directly to

www.planit.com/licenceactivation.

Type or paste in your Lock Code and click Next

If your lock code cannot be found, click Enter Additional Customer Information to proceed. Enter your Customer ID and Servercode (both can be found in your delivery note) and the Lock Code. Click Generate Licence.

Once you have generated the license, a new page will be displayed. This contains a link for downloading the keyfile. If you have provided your email address (in step 1) the keyfile will also be sent as an email attachment. 4. Save the keyfile

You can only use the keyfile on the server on which you generated the lock code. 5. From your installation DVD, run the file:

\\Sentinel RMS Licensing\\Administer and Monitor\\wlmadmin.exe

Alternatively, run c:\\Program Files\\Common Files\\Planit\\2013.10\\ Utilities\\ Administer and Monitor\\wlmadmin.exe.

6. In the dialog that opens, under Subnet Servers select your server. Right-click and select Add Features ? From a File ? To Server and its File. 译：

4.在打开的对话框中，您有权要求您的许可文件在互联网或浏览选项 以您已经下载或通过电子邮件收到的文件。 要申请许可证文件在互联网上

1.键入或复制和粘贴Servercode，然后点击下一步

2.单击申请许可文件从维拉服务器请求一个许可证文件在互联网上 3.在许可证激活对话框中，选中细节都正确显示，然后单击下一步 要安装已发送到你的许可文件

1.键入或复制和粘贴Servercode，然后点击下一步 2.单击使用许可文件

3.浏览并选择许可文件（该许可文件将被命名为。一，即 1234-4567-1234-4567-1234-4567.one例如） 4.单击下一步

5.在确认对话框中，单击Finish完成安装 您的许可证已经安装好，并准备使用。 选项2 - 使用WlmAdmin.exe

1.第一步骤是生成锁码服务器。从你的安装DVD，运行该文件： \\圣天诺RMS授权\\生成锁定代码\\ GenerateLockCode.exe

请注意，在打开的对话框中输入锁码。此外，单击保存，保存到一个文件中。 如果GenerateLockCode.exe失败，请阅读位于该GenerateLockCodeHelp.txt文件 同一文件夹中。

2.现在，您需要通过在线提交您的锁码以获得许可证密钥文件。 按照您的交货单的链接。您Servercode和客户ID会显示

自动。键入或你的锁码粘贴。或者，添加您的电子邮件地址，然后单击 生成许可证。转到步骤4。

3.如果您是老顾客，我们已经有文件锁定码，你可以直接去 www.planit.com/licenceactivation。 键入或你的锁码粘贴，然后单击下一步

如果你的锁码不能被发现，单击输入更多的客户信息来进行。进入

您的客户ID和Servercode（两者都可以在您的交货单上找到）和锁码。 点击生成许可证。

一旦你已经产生了许可证，一个新的页面会显示出来。它包含一个链接下载

密钥文件。如果您提供您的电子邮件地址（在步骤1中）的密钥文件也将被作为电子邮件附件。 4.保存密钥文件

您只能使用密钥文件对您产生的锁码的服务器上。 5.从您的安装DVD，运行该文件：

\\圣天诺RMS许可\\管理和监控\\ wlmadmin.exe

另外，运行C：\\ Program Files文件\\ Common Files文件\\ Planit\\2013.10\\工具\\管理和 监控\\ wlmadmin.exe。

6.在打开的对话框中，在子网服务器选择服务器。右键单击，然后选择添加 ?功能从文件?至服务器和文件。

Note: Product licenses are referred to as 'features' in Sentinel RMS?. 7. Browse for your saved keyfile, select it and click OK.

Click OK on the confirmation dialog for each license that is displayed.

This completes the server and license installation. You are now ready to configure the client PCs. 译：

注：产品的许可证被称为前哨RMS?“功能”。 7.浏览您保存的密钥文件，选中它，然后单击确定。 针对所显示的每个许可证确认对话框中单击OK。

这样就完成了服务器和许可证安装。您现在可以配置客户端PC。

: installation guide

Configuring Network Licenses on the Client PC

Once a network license server has been set up (per the Network License Installation section above), the client PCs (the PCs running Alphacam) must be configured as follows. Please see the Planit CLS help file for more information. Configuring the Client PC Using CLS

1. Ensure that the Client License Server (CLS) is running on the client PC. When running, the CLS icon (a yellow key) appears in the Windows Notification Area. ：安装指南

配置网络许可证的客户端PC上

一旦网络许可服务器已经设置（每个网络许可证安装一节以上），客户端 个人电脑（运行Alphacam的PC机）必须被配置为如下。 请参阅Planit CLS帮助文件的详细信息。 配置客户端PC使用CLS

1.确保客户端许可证服务器（CLS）在客户端PC上运行。当运行时，CLS图标（

黄键）出现在Windows通知区域。

2. Right-click on the CLS icon and select License Manager

3. In the dialog that opens, click Search Network from the Server menu list the Sentinel RMS server(s). 4. Select the server that you wish to connect to and click Change Active Server. 5. Confirm that you wish to change the active server, and close the dialog.

6. The Configure Network Licenses dialog will list the licenses available for selection on the server. If the dialog is not displayed select the Configure Network Licenses option from the CLS menu.

7. Select the license that you wish to use and click Reserved. Additional Module license may now appear on the right side of the dialog.

8. Select any other licenses that you require and click OK. 9. Your Alphacam installation is now licensed and ready to use.

Please note these licenses are only effectively 'pre-selected' for your PC. To run the software, the licenses must be available on the server at run time. 译：

在CLS图标2.右键单击并选择许可证管理

3.在打开的对话框中，单击搜索网络从服务器菜单列表中找到Sentinel RMS服务器（S）。 4.选择要连接并单击更改活动服务器的服务器。 5.确认您要更改的活动服务器，并关闭对话框。

6.配置网络许可证对话框会列出可供选择的服务器上的许可证。如果 不显示在对话框中选择配置网络许可证从CLS菜单选项。

7.选择您要使用，并单击保留的许可。现在附加模块许可证，可能会出现 在右侧的对话框。

8.选择您需要的任何其他许可证，然后单击确定。 9.您Alphacam安装现在行货，并准备使用。

请注意，这些许可证仅有效的“预选”为您的电脑。运行软件时， 许可证必须是可用的服务器在运行时上。

: installation guide IMPORTANT NOTES

inel Network License Manager, it may be required to set the license

server name. This can be done one of the two ways described below.

This is to be done on the PC which is running Alphacam, not the PC which is running the Sentinel License Manager. Option 1

1. Add an environment variable named LSHOST to the PC which is running Alphacam, not the License Manager

2. Set the value of this variable to the name or IP address of the License Manager server (e.g. SERVER_NAME or 192.168.0.100)

Please contact your System Administrator or Alphacam Technical Support for assistance in setting this system variable.

Option 2

1. Create a new text file and name it LSHOST, with no extension. An example file can be found in the Sentinel_RMS_Licensing\\Sample LSHOST File folder on the Alphacam installation disc. 2. Edit the LSHOST file (e.g. open in Notepad) and enter the name or IP address of the License Manager server in the first line of the file (e.g. SERVER_NAME or 192.168.0.100) 3. Save and close the LSHOST file

4. Copy or move this LSHOST file to the C:\\Program Files\\Common Files\\Planit\\\\CLS folder.

With either option, you can provide a list of license server names if multiple servers are to be searched. Each name must be separated by a : symbol (e.g. SERVER_ONE:SERVER_TWO). Alphacam will try each license server in the list, beginning with the first.

\\Quick Reference Guides folder on the Alphacam DVD for

additional Planit CLS licensing documentation. 译：：安装指南 重要提示

如果Alphacam未能找到哨兵网络许可管理器，它可能需要设置许可证 服务器名称。这是可以做到下面描述的两种方法之一。

这是要被运行Alphacam，它正在运行的Sentinel不是PC PC上进行 许可证管理。 选项1

1.添加其运行Alphacam命名LSHOST到PC的环境变量，而不是 许可证管理

2.设置这个变量的License Manager服务器的名称或IP地址的值（如 SERVER_NAME或192.168.0.100）

请设置您的系统管理员或Alphacam技术支持联系以获得帮助 该系统变量。 选项2

1.创建一个新的文本文件并将其命名为LSHOST，不带扩展名。示例文件可以在被发现 在Alphacam安装光盘上Sentinel_RMS_Licensing\\样品LSHOST文件的文件夹。 2.编辑LSHOST文件（例如在记事本中打开），然后输入许可证的名称或IP地址 在文件的第一行Manager服务器（如SERVER_NAME或192.168.0.100） 3.保存并关闭文件LSHOST

4.复制或移动此LSHOST文件到C：\\ Program Files文件\\ Common Files文件\\ Planit\\<版本>\\ CLS 文件夹中。

与这两种选择，你可以提供的许可证服务器名称的列表，如果多个服务器进行搜索。 符号（如SERVER_ONE：SERVER_TWO）每名必须以隔开。 Alphacam将尝试 列表中的每个许可证服务器，与第一开始。

见的Alphacam DVD的Sentinel_RMS_Licensing\\快速参考指南文件夹 附加Planit CLS许可文档。

本文来源：https://www.bwwdw.com/article/lek7.html