T430HVN01.0 SKD product final spec_v1.3_LBC_20140909

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3Model Name: T430HVN01.0Issue Date : 2014/09/03 ( )Preliminary Specifications (＊)Final SpecificationsCustomer SignatureApproved ByDateAUOApproval By PM Director JackyDate_________________________________ Note____________________________________ Reviewed By RD Director Eugene ____________________________________ Reviewed By Project Leader Jr ____________________________________ Prepared By PM Jun ____________________________________© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 1 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3CONTENTS1. GENERAL DESCRIPTION ............................................................................................................................................4 2. ABSOLUTE MAXIMUM RATINGS ...................................................................................................................................5 3. ELECTRICAL SPECIFICATION .......................................................................................................................................6 3.1 3.1.1 3.1.2 3.1.3 3.1.4 3.2 3.2.1 3.2.2 3.2.3 3.3 3.4 3.5 ELECTRICAL CHARACTERISTICS .............................................................................................................................6 DC Characteristics .............................................................................................................................................6 AC Characteristics .............................................................................................................................................7 DRIVER CHARACTERISTICS ......................................................................................................................8 TCON Characteristics .......................................................................................................................................8 INTERFACE CONNECTIONS .....................................................................................................................................11 T-Con Board Pin Map ......................................................................................................................................11 LVDS Option.....................................................................................................................................................14 Signal Timing Specification .............................................................................................................................15 SIGNAL TIMING WAVEFORMS.................................................................................................................................16 COLOR INPUT DATA REFERENCE ...........................................................................................................................17 POWER SEQUENCE FOR LCD.................................................................................................................................18VCOM ADJUST SOP ............................................................................................................................................................19 3.6.1 3.6.2 3.6.3 3.6.4 3.6.5 4. 5. 6. 7. VCOM I2C Tuning Step...................................................................................................................................19 Flicker Pattern ..................................................................................................................................................19 WP (Write Protect) Disable .............................................................................................................................19 Adjust SOP........................................................................................................................................................19 Interval of Step to Step .....................................................................................................................................20OPTICAL SPECIFICATION ........................................................................................................................................21 MECHANICAL CHARACTERISTICS .......................................................................................................................25 PACKING........................................................................................................................................................................26 PRECAUTIONS .............................................................................................................................................................28 7.6 7.7 7.8 7.9 7.10 7.11 MOUNTING PRECAUTIONS .....................................................................................................................................28 OPERATING PRECAUTIONS.....................................................................................................................................28 ELECTROSTATIC DISCHARGE CONTROL ...............................................................................................................28 PRECAUTIONS FOR STRONG LIGHT EXPOSURE.....................................................................................................29 STORAGE.................................................................................................................................................................29 HANDLING PRECAUTIONS FOR PROTECTION FILM OF POLARIZER .....................................................................29© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 2 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3RECORD OF REVISIONVersion 0.0 1.0 Date 2014/06/06 2014/6/24 6 13 1.1 2014/8/6 25 21 1.2 2014/8/27 6 7 1.3 2014/9/3 21 Page First release Update DC Characteristics Update LVDS connector control and I2C pin description Update OC drawing Update Color Chromaticity Update 3.1.1 Power Consumption Max=10.8 Update 3.1.2 I2C Interface table Correct Center Transmittance: Tr=6.0% Description© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 3 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.31. General DescriptionThis specification applies to the 43 inch Color TFT-LCD SKD model T430HVN01.0. This Open Cell Unit has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 43 inch. This Open Cell Unit supports 1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.* General InformationItems Active Screen Size Display Area Outline Dimension Cell Dimension Driver Element Bezel Opening Display Colors Number of Pixels Pixel Pitch Pixel Arrangement Display Operation Mode Surface Treatment Weight Rotate Function Display OrientationSpecification 43 940.896 (H) x 529.25 (V) 950.896(H) x 575.89 (V) 950.896 (H) x 541.75 (V) x 1.33(D) a-Si TFT active matrix 945.896(H) x 533.25 (V) 8 bit, 16.7M 1,920x1,080 0.49 (H) x 0.49(W) RGB vertical stripe Normally Black Anti-Glare, 3H Typ. 1500 Unachievable Signal input with “ABC”Unit inch mm mm mmNoteD: cell thicknessmm Colors Pixel mmRecommendHaze=2% gNote 1Note 1: LCD display as below illustrated when signal input with “ABC”.© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 4 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.32. Absolute Maximum RatingsThe followings are maximum values which, if exceeded, may cause faulty operation or damage to the unitItem Logic/LCD Drive Voltage Input Voltage of Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature Electro Statistic Voltage Note 1: Duration:50 msec.Symbol VDD Vin TOP HOP TST HST PST ESDMin -0.3 -0.3 0 10 -20 10Max 14 4 +50 90 +60 90 65Unit [Volt] DC [Volt]DC [ C] [%RH] [ C] [%RH] [ C] [KV]o o oConditions Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 3 Note 4±2Note 2 : Maximum Wet-Bulb should be 39℃ and No condensation.The relative humidity must not exceed 90% non-condensing at temperatures of 40 greater than 40℃, the wet bulb temperature must not exceed 39℃.℃ or less. At temperaturesNote 3: Surface temperature is measured at 50℃ Dry condition Note 4: ESD protection procedure must be applied during production process; especially polarizer protection films remove process. Please directly contact AUO if module process advice is required.© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 5 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33. Electrical SpecificationThe T430HVN01.0 Open Cell Unit requires power input which is employed to power the LCD electronics and to drive the TFT array and liquid crystal.3.1 Electrical Characteristics 3.1.1 DC CharacteristicsParameter LCD Power Supply Input Voltage Power Supply Input Current Power Consumption Inrush Current Permissible Ripple of Power Supply Input Voltage Input Differential Voltage Differential Input High Threshold LVDS Interface Voltage Differential Input Low Threshold Voltage Input Common Mode Voltage CMOS Interface Input High Threshold Voltage Input Low Threshold Voltage VDD IDD PC IRUSH VRP 10.8 ----200 +100 12 0.43 5.16 --400 -13.2 0.9 10.8 4 VDD * 5% 600 +300 VDC A Watt A mVpk-pk mVDC mVDC 1 1 2 3 4 4 Symbol Value Min. Typ. Max Unit Note∣VID∣VTHVTL VICM VIH (High) VIL (Low)-300 1.1 2.7 0-1.25 ----100 1.4 3.3 0.6mVDC VDC VDC VDC4 4 5 5© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 6 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33.1.2 AC CharacteristicsParameter Symbol Value Min. -500 Fclk -3% 30 Typ. ---Max +500 Fclk +3% 200 Unit NoteInput Channel Pair Skew Margin Receiver Clock : Spread Spectrum Modulation range Receiver Clock : Spread Spectrum Modulation frequency Receiver Data Input Margin Fclk = 85 MHz Fclk = 65 MHz SCL clock frequency Clock Pulse Width Low Clock Pulse Width High Clock Low to Data Output Valid Start Setup Time I2C Interface Start Hold Time Stop Setup Time Data In Setup Time Data In Hold Time SCL/SDA Rise Time SCL/SDA Fall TimetSKEW (CP) Fclk_ss Fssps MHz KHz6 7 7LVDS InterfacetRMG-0.4 -0.5 1.85 0.4 1.76 0.6 0.6 0.6 0.1 0 ----0.4 0.5 350 0.3 0.3ns8fSCL tLOW tHIGH tAA tSTASU tSTAHD tSTOSU tDSU tDHD tR tFkHz us us us us us us us us us us 9© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 7 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33.1.3 DRIVER CHARACTERISTICSItem Symbol DST Min Max 100 Unit [ condition Note℃] Note : Any point on the driver surface must be less than 100℃ under any conditions.Driver Surface Temperature3.1.4 TCON CharacteristicsItem Symbol TST Min Max 85 Unit [ condition Note℃] Note : Any point on the TCON surface must be less than 85℃ under any conditions.TCON Surface Temperature Note : 1. Test Condition: (1) VDD = 12.0V (2) Frame rate = 60Hz (3) Fclk= Max freq. (4) Temperature = 25 (5) Typ. Input current : White Pattern Max. Input current: Heavy loading pattern defined by AUO℃2.Measurement condition : Rising time = 400us90% VDDGND10% 400 µs3. Test Condition: (1) The measure point of VRP is in LCM side after connecting the System Board and LCM. (2) Under Max. Input current spec. condition. 4. VICM = 1.25VLVDS V IC M LVDS + V TH |V ID | V TLGND|V ID |0V|V ID |© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 8 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.35. The measure points of VIH and VIL are in LCM side after connecting the System Board and LCM. 6. Input Channel Pair Skew Margin.Note: x = 0, 1, 2, 3, 4 7. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures.1/FSS Fclk_ Fclk_ss( ss(max) max)FclkFclk_ Fclk_ss( ss(min) min)8. Receiver Data Input Margin Parameter Input Clock Frequency Input Data Position0 Input Data Position1 Input Data Position2 Input Data Position3 Input Data Position4 Input Data Position5 Input Data Position6 Symbol Fclk tRIP1 tRIP0 tRIP6 tRIP5 tRIP4 tRIP3 tRIP2 Rating Min Fclk (min) -|tRMG| T/7-|tRMG| 2T/7-|tRMG| 3T/7-|tRMG| 4T/7-|tRMG| 5T/7-|tRMG| 6T/7-|tRMG| Type -0 T/7 2T/7 3T/7 4T/7 5T/7 6T/7 Max Fclk (max) |tRMG| T/7+|tRMG| 2T/7+|tRMG| 3T/7+|tRMG| 4T/7+|tRMG| 5T/7+|tRMG| 6T/7+|tRMG| Unit MHz ns ns ns ns ns ns ns Note T=1/Fclk© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 9 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3tRIP2 tRIP3 tRIP4 tRIP5 tRIP6 tRIP0 tRIP1 LVDS-Rx Input Data LVDS-Rx Input Clock Rx3 Rx2 Rx1 Rx0 Rx6 Rx5 Rx4 Rx3 Rx2 Rx1 Rx0 Rx6Vdiff = 0V 1/Fclk=T9. I2C Read/Write TimingSTART STOPSDA70%tR tF30% 30%70%INtSTASUtSTAHDtDSUtDHDtSTOSUSCL tAA SDA OuttHIGHtLOW© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 10 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33.2 Interface Connections 3.2.1 T-Con Board Pin MapLCD connector: 196395-60041-3 (P-TWO, LVDS connector，母頭) PIN 1 2 Symbol N.C. SCL Description No connection (for AUO test only. Do not connect) EEPROM Serial Clock EEPROM Write Protection 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 WP SDA N.C. N.C. LVDS_SEL N.C. N.C. N.C. GND CH1_0CH1_0+ CH1_1CH1_1+ CH1_2CH1_2+ GND CH1_CLKCH1_CLK+ GND CH1_3CH1_3+ N.C. High(3.3V) for Writable, Low(GND) for Protection EEPROM Serial Data No connection (for AUO test only. Do not connect) No connection (for AUO test only. Do not connect) Open/High(3.3V) for NS, Low(GND) for JEIDA No connection (for AUO test only. Do not connect) No connection (for AUO test only. Do not connect) No connection (for AUO test only. Do not connect) Ground LVDS Channel 1, Signal 0LVDS Channel 1, Signal 0+ LVDS Channel 1, Signal 1LVDS Channel 1, Signal 1+ LVDS Channel 1, Signal 2LVDS Channel 1, Signal 2+ Ground LVDS Channel 1, Clock LVDS Channel 1, Clock + Ground LVDS Channel 1, Signal 3LVDS Channel 1, Signal 3+ No connection (for AUO test 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 CH2_0+ CH2_1CH2_1+ CH2_2CH2_2+ GND CH2_CLKCH2_CLK+ GND CH2_3CH2_3+ N.C. N.C. N.C. N.C. GND GND GND N.C. VDD VDD LVDS Channel 2, Signal 0+ LVDS Channel 2, Signal 1LVDS Channel 2, Signal 1+ LVDS Channel 2, Signal 2LVDS Channel 2, Signal 2+ Ground LVDS Channel 2, Clock LVDS Channel 2, Clock + Ground LVDS Channel 2, Signal 3LVDS Channel 2, Signal 3+ No connection (for AUO test only. Do not connect) No connection (for AUO test only. Do not connect) No connection (for AUO test only. Do not connect) No connection (for AUO test only. Do not connect) Ground Ground Ground No connection (for AUO test only. Do not connect) Power Supply, +12V DC Regulated Power Supply, +12V DC Regulated 28 CH2_0LVDS Channel 2, Signal 0PIN 26 27 Symbol N.C. N.C. Description No connection (for AUO test only. Do not connect) No connection (for AUO test only. Do not connect)© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 11 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3only. Do not connect) 25 N.C. No connection (for AUO test only. Do not connect) 50 51 VDD VDD Power Supply, +12V DC Regulated Power Supply, +12V DC Regulated© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 12 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3Note * : Open/High(3.3V)Note ** : Open/Low(GND)Note **** : SCL/SDANote ***** : WP© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 13 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33.2.2 LVDS Option LVDS Option = High/Open NSP re vio u s C y cle C lo ckC u rren t C yc leN e xt C yc leC H x_0+ C H x_0-R1R0G0R5R4R3R2R1R0G0C H x_1+ C H x_1-G2G1B1B0G5G4G3G2G1B1C H x_2+ C H x_2-B3B2DENANAB5B4B3B2DEC H x_3+ C H x_3-R7R6NAB7B6G7G6R7R6NANote: x = 1, 2, 3, 4…LVDS Option = LowJEIDAC u rren t C ycle N e x t C ycleP re vio u s C yc le C lo ckCH x_0+ CH x_0-R3R2G2R7R6R5R4R3R2G2CH x_1+ CH x_1-G4G3B3B2G7G6G5G4G3B3CH x_2+ CH x_2-B5B4DENANAB7B6B5B4DECH x_3+ CH x_3-R1R0NAB1B0G1G0R1R0NANote: x = 1, 2, 3, 4…© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 14 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33.2.3 Signal Timing SpecificationThis is the signal timing required at the input of the user connector. All of the interface signal timing should be satisfied with the following specifications for its proper operation.Timing Table (DE only Mode)Signal Item Period Vertical Section Active Blanking Period Horizontal Section Active Blanking Clock Vertical Frequency Horizontal Frequency Frequency Frequency Frequency Symbol Tv Tdisp (v) Tblk (v) Th Tdisp (h) Tblk (h) Fclk=1/Tclk Fv Fh Min. Typ. Max Unit Th1100 20 1030 70 53 47 601125 1080 45 1100 960 140 74.25 60 67.51480 400 1325 365 82 63 73Th TclkTclk MHz Hz KHzNotes: (1) Display position is specific by the rise of DE signal only. Horizontal display position is specified by the rising edge of 1 DCLK after the rise of 1 DE, is displayed on the left edge of the screen. (2)Vertical display position is specified by the rise of DE after a “Low” level period equivalent to eight times of horizontal period. The 1 data corresponding to one horizontal line after the rise of 1 DE is displayed at the top line of screen. (3)If a period of DE “High” is less than 1920 DCLK or less than 1080 lines, the rest of the screen displays black. (4)The display position does not fit to the screen if a period of DE “High” and the effective data period do not synchronize with each other.st st st st© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 15 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3Tv Tblk(v) Th DE Tdisp(v)M pixelRGB DataInvalid DataLine NLine 1Line 2Line 3Line 4Line NInvalid DataN L in eCLK Tclk Th Tdisp(h) DETblk(h)CH1Pixel M-7Pixel M-5Pixel M-3Pixel M-1Invalid DataPixel 1Pixel 3Pixel 5Pixel 7Pixel 9Pixel 11Pixel M-5Pixel M-3Pixel M-1Invalid DataPixel 1Pixel 3CH2Pixel M-6Pixel M-4Pixel M-2Pixel MInvalid DataPixel 2Pixel 4Pixel 6Pixel 8Pixel 10Pixel 12Pixel M-4Pixel M-2Pixel MInvalid DataPixel 2Pixel 4© Copyright AU Optronics Corp. 2014 All Rights Reserved.3.3 Signal Timing WaveformsPage 16 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33.4 Color Input Data ReferenceThe brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input.COLOR DATA REFERENCEInput Color Data Color RED MSB LSB MSB GREEN LSB MSB BLUE LSBR7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red(255) Green(255) Basic Color Blue(255) Cyan Magenta Yellow White RED(000) RED(001) R ---RED(254) RED(255) GREEN(000) GREEN(001) G ---GREEN(254) GREEN(255) BLUE(000) BLUE(001) B ---BLUE(254) BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 1 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 17 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33.5 Power Sequence for LCDParameter t1 t2 t3 t4 t5 t6 t7 t8 t9 t10 t11Values Min. 0.4 0.1 450 0*1Type. -----------------------Max. 30 50 --------*2Unit ms ms ms ms ms ms ms ms ms ms ms0 --500 10 0 450 150*3--50 -------Note: (1) t4=0 : concern for residual pattern before BLU turn off. (2) t6 : voltage of VDD must decay smoothly after power-off. (customer system decide this value) (3) When CMOS Interface signal is N.C. (no connection), opened in Transmitted end, t8 timing spec can be negligible.© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 18 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3VCOM Adjust SOPIf you need below pattern or more detail information, please directly contact AUO for engineer service.3.6.1 VCOM I2C Tuning Step3.6.2 Flicker Pattern ■V-stripe Green (L128)3.6.3 WP (Write Protect) Disable Disable □ ■ L H Enable H L Default (NC) H L3.6.4 Adjust SOP© Copyright AU Optronics Corp. 2014 All Rights Reserved. Page 19 / 29

本文来源：https://www.bwwdw.com/article/dgji.html