S7011-0906中文资料

元器件交易网

S7010/S7011/S7015 series are families of FFT-CCD image sensors specifically designed for low-light-level detection in scientific applications. By using the binning operation, S7010/S7011/S7015 series can be used as a linear image sensor having a long aperture in the direction of the device length. This makes S7010/S7011/S7015 series ideally suited for use in spectrophotometry. The binning operation offers significant improvement in S/N and signal processing speed compared with conventional methods by which signals are digitally added by an external circuit. S7010/S7011/S7015 series also feature low noise and low dark signal (MPP mode operation). This enables low-light-level detection and long integration time, thus achieving a wide dynamic range.

S7010/S7011/S7015 series have an effective pixel size of 24 × 24 µm and are available in image areas ranging from 12.288 (H) × 1.44 (V) mm2 (512 × 60 pixels) up to a large image area of 24.576 (H) × 6.048 (V) mm2 (1024 × 252 pixels).

l100 % fill factor

lWide dynamic rangelLow dark signallLow readout noiselMPP operation

lSemiconductor inspectionlDNA sequencer

lLow-light-level detection

1

2

3

4

5

6

7

8

9

I Specifications of built-in temperature sensor

A chip thermistor is built in the same package with a CCD chip, and the CCD chip temperature can be monitored with it. A relationbetween the thermistor resistance and absolute temperature is expressed by the following equation.R1 = R2 × expB (1 / T1 - 1 / T2)

where R1 is the resistance at absolute temperature T1 (K) R2 is the resistance at absolute temperature T2 (K) B is so-called the B constant (K)

The characteristics of the thermistor used are as follows. R (298K) = 10 kW

B (298K / 323K) = 3450 K

RESISTANCE

1 M100 k10 kTEMPERATURE (K)

I Precaution for use (Electrostatic countermeasures)

KMPDB0111EA

G Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band withan earth ring, in order to prevent electrostatic damage due to electrical charges from friction.

G Avoid directly placing these sensors on a work-desk or work-bench that may carry an electrostatic charge.

G Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity todischarge.

G Ground the tools used to handle these sensors, such as tweezers and soldering irons.

It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to theamount of damage that occurs.

I Element cooling/heating temperature incline rate

Element cooling/heating temperature incline rate should be set at less than 5 K/min.

Features

lC7020: for S7010 seriesC7021: for S7011 seriesC7025: for S7015 series

lArea scanning or full line-binnng operation lReadout frequency: 250 kHzlReadout noise: 20 e-rms

l T=50 C ( T changes by radiation method.)

Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.

Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2003 Hamamatsu Photonics K.K.

HAMAMATSU PHOTONICS K.K., Solid State Division

1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184,

U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218

Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658

France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10

United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741

10

Cat. No. KMPD1022E09Feb

. 2003 DN

本文来源：https://www.bwwdw.com/article/xsy4.html