英文说明书--CNC雕刻机-tonsen--打印 - 图文

CNC Router User Mannual

version 3.2

www.fmuser.com

第 1 页 共 22 页

Thank you very much for your selection of TS series engraving machine east, TS series engraving machine is east of electronic production of high quality, multi-function carving machines, is widely used in the handicraft, anaglyph, badges, medal, model, PCB drilling sculpture, biological experiment, etc

The machine adopts high-grade aluminium processing, and adopts imported precision ball screw machining accuracy can be guaranteed. This manual is TS series small engraving machine manual

This handbook provides users installation and operation parameters Settings, abnormal diagnosis and maintenance and safe use of related matters. In order to guarantee the normal installation and operation this series engraving machine products, please use TS series engraving machine, be sure to read carefully before this handbook. This manual is random send attachments, please use appropriate is custodial, to prepare for future use.

If still exist in use process can not solve the difficult problem of this unit, please contact with dealers or direct contact our customer service center.

The contents of this manual data are subject to change without notice.

Eye

The first chapter: safety precautions and inspection Chapter 2: engraving machine installation and process Chapter 3: control software installation Chapter 4: auxiliary software installation Chapter 5: interface

Chapter 6: beginner learning methods Chapter 7: attention Chapter 8: shortcuts list Chapter 9: common fault

Chapter 10: maintenance and maintenance Chapter 11: each type machine motor parameters Chapter 12: appendix 1 - tools selection Chapter 12: appendix 2 - ARTCAM profile

Chapter 13: appendix 3 - wen tai engraving system application

The first chapter of safety precautions and inspection

1.1 safety precautions

Responding to be installed in the gas containing the explosive environment,

www.fmuser.com

第 2 页 共 22 页

otherwise have caused the explosion danger

Responding to confirm the input power is completely disconnect circumstances, can the attachment plug and play, otherwise it may cause controller failure

Responding to this device in the circuit and its components, please contact with internal risk of electric shock, otherwise there.

When using the controller interface adopts power grounding terminal center on the basis of the national electrical safety, please regulations and other relevant standards and reliable grounding.

In responding to shut off the power switch indicator, after 5 minutes, do not touch any parts within the controller boards and utility, which involves part can be confirmed after discharge, or have built-in electric shock risk.

Responding to please screw gaskets and conductive into such foreign or internal controller and the danger of fire damage controller

Responding to start if burning fuse, please confirm the internal and external fittings of short-circuit without changing the same specification after electrify. Fuse

Under the state adopts controller power open not inserted output, otherwise it may damage the circuit inside the controller

Don't be placed in the second-ranking controller can rain or sunshine point-blank, otherwise have damaged the controller

After the open-package inspection 1.2

Dong da electric TS series engraving machine factory has undergo strict testing and quality inspection. After buy, please check whether the packing of the products for transportation and damage, check the immodesty related accessories are complete.

Responding to annex: see attached list

Responding to such as are found, please contact the electric equipment of or dealers.

The second chapter engraving machine installation and machining process 2.1 using environment

Had no corrosive gas, steam and dust

Responding to 20% ~ 90% environment humidity scope, condensation Responding to vibration than 5.8 m/s2 (0.6 g), Responding to no interference sources

Responding to environmental temperature range - 10 ° C ~ 50 ° C

Responding to ban in gas and liquid inflammable, explosive or dangerous environment using solid

www.fmuser.com

第 3 页 共 22 页

With 2.2 process machine movement coordinates

www.fmuser.com

第 4 页 共 22 页

Chapter 3: software installation Software and 3.1

Note: the software installation process ARTCAM except installation process choose language by default installation other outside! After the completion of the software installation must restart the computer!

After the installation is complete in desktop ICONS, you can generate a few only

retains the following several ICONS

3.2 software profile

---- Professional computer-aided mapping software

----- The software (graphics, text, anaglyph, tool path editor),

Note: the tool path to preserve the format selection G Code (mm) (tap)

------ Sculpture software (carving machine control software).

3.3 software installation

1, will enter into the drive disc, MACH directory, and double-click. “NO.1” MACH software installation,the diagram below the window

www.fmuser.com

第 5 页 共 22 页

www.fmuser.com

第 6 页 共 22 页

Click ok after the installation

MACH directory, click back. “NO.2”, choose corresponding models and install it machine

www.fmuser.com

第 7 页 共 22 页

After the installation points MACH software installation

Chapter 4: auxiliary software installation

Artcam installation, CD:\\artcam\\pdxdac7\\install Will see below interface

www.fmuser.com

第 8 页 共 22 页

NEXT

YES

NEXT

www.fmuser.com 第 9 页 共 22 页

NEXT

Select your languageNEXT

Some NEXT installation

After the completion of the installation directory artcam enter Lock \\ software installation PATCH on Lock

Select directory C:\\Program Files\\artcampro7000\\Exec , click Apply

All the installation is completed restart your computer

www.fmuser.com

第 10 页 共 22 页

Chapter 5: control software interface

Desktop ICONS

5.1 software interface. Complete,The software of the screen has seven main interface

A display area code, * * * * * b, specific axial location

* c, dao and track display (or mouse made corresponding operation), * d, code execution control button

* e, emergency stop button - open software must point it (green) not flashing

Software can only be used (shortcut key \

* g, spindle manual control (open/close) shortcuts F5, Can add speed, incremental place, can according to click on 10 thousand

* h, feeding rate adjustment (shortcuts F11 F10),

* 5.2 manual control shortcut key direction (page, page down arrow), manual speed shortcuts:\

* 5.3 procedure manual function interface

www.fmuser.com

第 11 页 共 22 页

In the program under the condition free press the keyboard Tab keys can open manual functions,interface as follows

The sixth chapter novice learning methods 6.1 study method

First, please understand operating machine software and operation method of the related machines, don't blindly run again after running!

Learning to operate machines can not installed with drawing tools and methods: (words) will be a ballpoint pen with elastic fixed in the Z axis (or above) running program axis, so that can assure safety and can learn the basic operation of the machine, the process will please spindle motor out plug, to ensure the safety of you!

Basic tools can be installed after the master, try try using a soft material carving as possible, lest because the material carving machine or improper operation and broken sword

Very sharp knives, please must pay attention to safety!

The basic motion. 6.2

First open the control software to open controller power

www.fmuser.com

第 12 页 共 22 页

Closed emergency stop (state) if the red and green evergreen interval is launched stop flashing, cannot use any function

Use the keyboard, check each shaft manually controlled movement direction correctly, the direction key should be consistent with the tools, key direction upward movement, DOWN keys downward motion

Note: the axial direction for incorrect according to the method can change the direction of change As shown

The basic use of 6.3 process A document, edit the original

Format: CAD file (format: DXF) / PCB files/picture BMP...

Text or graphics can directly use the text or graphics Artcam tools to edit

B, generating processing code

Setting and calculating tool path generation TAP files/NC... . Relevant software is introduced: Artcam wen tai carved with etc

C, clamping work-piece (for flatness requirement high processing such as PCB must use double-sided gum and benchmark plate fixation)

Note: the base plate can use PVC materials such as the acrylic, use double-sided gum paste on the platform, the size according to the needs, use the milling around 3mm

The milling plane

D, origin and knife

Will move to the origin of the workpiece tool, click Settings for the origin of the software

(manual speed adjustment shortcut \

Example: the origin of the workpiece in lower XY in the origin of the workpiece, Z surface

Through the keyboard manual control tool will move to the left, click on the software workpiece origin and Settings for dao (Z) will set tool and workpiece surface move,

www.fmuser.com

第 13 页 共 22 页

cutting time clicking Z reset

If need to adjust position after the sword, or highly through direct modification coordinates to compensate

Specific means is: left click on to modify the coordinates of the shaft and input coordinates, then press enter confirmation (im) under the condition for English, E, started processing 1, loading G code

2 and selection process documents

3、and coordinates zero

www.fmuser.com

第 14 页 共 22 页

4, reduce feed rate - 50% (F10) increase shortcuts to rate (shortcuts F11) 5 and click on \

6, after the operation in the machining process, adjust feeding rate according to actual processing documents and material and adjusting feed rate 0% ~ 100%

7 and machining process can point \

After the stop to continue processing, pay attention to the first open the spindle

8 and the use of suspended, in the machining process may at any time suspend processing, suspended after start operation can continue processing Chapter 7 of the note

1, processing automatically, spindle automatically shut off, but still in this device driver motor energized condition, so if long time not operate please close controller power or emergency stop

2 emergency, please press the emergency stop or shortcut \

Chapter 10: maintenance and maintenance

Engraving machine is computer control precision equipment, its processing movement is composed of precision mechanical movement mechanism, in order to ensure the normal use of carving machines, must often to carving machine maintenance and

concrete requirements are as follows:

1 the daily maintenance

Will be working site, keep clean the machine, water-cooled spindle each use

clean water before must check whether smooth.

Must often clean spindle chuck.

Timely liquidation silk pole on the rails and dirt, and the scraps to the wire

www.fmuser.com

第 15 页 共 22 页

rod guide added lubricant grease or.

Regular maintenance cycle (2) three months),

Open the Z axis, ball screw, protect clean on the rails and dirt, then gave

scraps ball screw and guide with grease or oil

Check the connecting cable connection.

Check belt wear

Chapter 11 each type machine motor parameters

After installing the software without the correct parameters Settings Axis Item TS-2518B/TS-2518C TS-3040C TS-3040C-TS-7050 TS3040B H50 X Steps 640 400 400 320 320 Per 速度 600 1200 1200 1200 2000 加速度 300 400 400 400 400 Y Steps 640 400 320 320 320 Per 速度 600 1200 1200 1200 2000 加速度 300 300 300 300 300 Z Steps 640 640 640 640 320 Per 速度 600 800 800 800 2000 加速度 300 300 300 300 300 Appendix 1: Engraving machine tool selection Tool use guidelines: 1 the acrylic cutting processing, recommend using spiral milling, single blade is processing smokeless insipidity, speed, high efficiency, non-sticky, environmental protection, its special real manufacturing process ensure machining the acrylic not and very thin knife (or even no knife), the surface is bright and clean level off. Surface to grind arenaceous effect, recommend using double spiral milling three blade. 2 density board (advertising mold cutting with), recommend using double spiral milling large scraps discharge, it has two high capacity scraps discharge groove, double design, has very good scraps discharge function, and then reach good balance in process, tools, high density board, don't smoke, black hat long service life etc. 3 aluminum cutting, recommend using single blade special-purpose aluminum with www.fmuser.com

第 16 页 共 22 页

cutter. In the process, non-stick knife, speed, high efficiency. 4 precision machining, recommend using small anaglyph round bottom kedao. 5 the cork, density board, original wood, PVC, acrylic large-scale deep anaglyph processing, recommend using single blade spiral milling. 6 no burr below on cutting, recommend using single blade, the double downcutting cutters. 7. Metal sculpture processing, recommend using single blade knife, double straight slot pan. 8.3 D wrecking maze &sealed ring, and a sharp edge, can make accurate 3D sculpture processing. 9 high density board, wood cutter tooth recommended edges. The MLB, plywood, processing, recommend using double straight slot cutter. 11. Slice blade effect, processing products processing, no burr surface will become warped. 12 metal mould machining milling cutter, recommend use tungsten, surface coating with hard titanium tresses. 13. The acrylic mirror sculpture processing recommended wrecking diamond. 14 as early particieboard recommended many stripes cutters. Appendix 2 www.fmuser.com

第 17 页 共 22 页

ARTCAM software interface and basic function is introduced (detailed check discs advanced tutorial lessons) 1 interface,

www.fmuser.com

第 18 页 共 22 页

Vector editing area

Tool.path.parts

www.fmuser.com

第 19 页 共 22 页

Basic processing parameters Settings (such as the depth, specifications, carving speed, spindle speed, etc.)

Note: no, just a specified parameters such as a safe speed, the specific scope when still can control software by adjusting the processing speed or spindle speed Mm diameter to a deep hole of 2mm, for example, materials for 2mm thick PVC board As the chart shows, processing mode selection process, the 2d profiles, 2mm safety depth of machining tool select Z highly 5mm 2mm cutter, from asher 0.5 mm downcutting step is to cut 2mm depth (four) feedrate 15mm/SEC (or 900mm/min) slice rate 6mm/SEC (or 360mm/min) spindle 15,000

Commonly use the default cutting direction along the milling, special circumstances can adopt inverse milling (such as sculpture soft material, such as cork, to improve smoothness, etc.)

Other general can use the default Settings

Choose the right to processing, now click vector sword will automatically generate Finally, save the format selection tool path G Code (mm) tap

www.fmuser.com

第 20 页 共 22 页

www.fmuser.com

第 21 页 共 22 页

5 1

Engraving machine parameters (for example) : other acrylic material can be tool,

Click the reference list 刀 具 行距 下切步下切速率进给率 主轴速度 路径间距 MM/秒 MM/秒 距 1.5柱刀 0.6 0.2-1 2-7 5-15 18000 2.0柱刀 0.8 0.5-1 2-7 5-15 18000 2.0双刃铣刀 0.8 0.5-1 2-7 5-15 18000 10°-0.1 0.03 0.05-1 1-2 3-5 18000 10°-0.5 0.2 0.2-1 2-6 5-12 18000 30°-0.2 0.08 0.2-1 2-5 4-10 18000 30°-0.1 0.03 0.05-1 1-4 3-8 18000

www.fmuser.com

第 22 页 共 22 页

本文来源：https://www.bwwdw.com/article/ztho.html