ST STB13NM60N,STD13NM60N,STF13NM60N,STI13NM60N,STP13NM60N,ST

November 2010Doc ID 15420 Rev 31/21

STB13NM60N,STD13NM60N,STF13NM60N STI13NM60N,STP13NM60N,STW13NM60N

N-channel 600 V , 0.28 Ω, 11 A MDmesh? II Power MOSFET

in D2P AK, DP AK, TO-220FP , I2P AK, TO-220, TO-247

Features

■100% avalanche tested

■Low input capacitance and gate charge ■

Low gate input resistance

Application

Switching applications

Description

These devices are made using the second generation of MDmesh? technology. This

revolutionary Power MOSFET associates a new vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters.

Order codes V DSS (@Tjmax)R DS(on) max

I D

STB13NM60N STD13NM60N STF13NM60N STI13NM60N STP13NM60N STW13NM60N

650 V

< 0.36 Ω

11 A

Table 1.Device summary

Order codes

Marking

Packages Packaging STB13NM60N STD13NM60N STF13NM60N STI13NM60N STP13NM60N STW13NM60N

13NM60N

D2P AK DP AK TO-220FP I2P AK TO-220TO-247

T ape and reel T ape and reel

Tube Tube Tube Tube

e6ab55b4dd88d0d233d46a65

Contents STB/D/F/I/P/W13NM60N

Contents

1Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.1Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2/21Doc ID 15420 Rev 3

STB/D/F/I/P/W13NM60N Electrical ratings

Doc ID 15420 Rev 33/21

1 Electrical ratings

Table 2.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

TO-220I2PAK TO-247D2PAK

DPAK

TO-220FP

V DS Drain-source voltage (V GS = 0)600V V GS Gate-source voltage ± 25V I D Drain current (continuous) at T C = 25 °C

1111(1)1.Limited only by maximum temperature allowed A I D Drain current (continuous) at T C = 100 °C

6.93 6.93 (1)A I DM (2)2.Pulse width limited by safe operating area

Drain current (pulsed)4444 (1)A P TOT

T otal dissipation at T C = 25 °C

90

25

W dv/dt (3)3.I SD ≤ 11 A, di/dt ≤ 400 A/μs, V DS peak ≤ V (BR)DSS , V DD = 80% V (BR)DSS.

Peak diode recovery voltage slope 15

V/ns V ISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;T C =25 °C)2500

V T stg Storage temperature - 55 to 150

°C T j

Max. operating junction temperature

150

°C

Table 3.

Thermal data

Symbol

Parameter

Value

Unit

DPAK D2PAK

I2PAK TO-220TO-247TO-220FP

R thj-case Thermal resistance

junction-case max 1.39

5°C/W R thj-amb Thermal resistance junction-ambient max 62.5

50

62.5

°C/W R thj-pcb Thermal resistance junction-pcb max 50

30

°C/W

T l

Maximum lead temperature for soldering purpose

300°C

Electrical ratings STB/D/F/I/P/W13NM60N 4/21Doc ID 15420 Rev 3 Table 4.Avalanche characteristics Symbol

Parameter Value Unit I AS

Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) 3.5A E AS Single pulse avalanche energy (starting T J =25 °C, I D =I AS , V DD =50 V)200mJ

STB/D/F/I/P/W13NM60N Electrical characteristics

Doc ID 15420 Rev 35/21

2 Electrical characteristics

(T CASE = 25 °C unless otherwise specified)Table 5.

On/off states

Symbol Parameter

Test conditions

Min.Typ.

Max.

Unit V (BR)DSS Drain-source

breakdown voltage I D = 1 mA, V GS = 0600

V I DSS Zero gate voltage

drain current (V GS = 0)V DS = Max rating

V DS = Max rating, @125 °C 1100μA μA I GSS Gate-body leakage current (V DS = 0)V GS = ± 25 V

0.1μA V GS(th)Gate threshold voltage V DS = V GS , I D = 250 μA 2

34V R DS(on)

Static drain-source on resistance

V GS = 10 V , I D = 5.5 A

0.28

0.36

Ω

Table 6.

Dynamic

Symbol Parameter

Test conditions

Min.

Typ.Max.Unit

C iss C oss C rss Input capacitance Output capacitance Reverse transfer capacitance V DS = 50 V , f = 1 MHz, V GS = 0

-790603.6-

pF pF pF C oss eq. (1)

1.C oss eq. is defined as a constant equivalent capacitance giving the same charging time as C oss when V DS

increases from 0 to 80% V DS

Equivalent output capacitance V GS = 0, V DS = 0 to 480 V -135-

pF Q g Q gs Q gd T otal gate charge Gate-source charge Gate-drain charge V DD = 480 V , I D = 11 A,V GS = 10 V ,(see Figure 19)-30415-nC nC nC R G

Gate input resistance

f=1 MHz open drain

-

4.7

-

Ω

Electrical characteristics STB/D/F/I/P/W13NM60N

6/21Doc ID 15420 Rev 3

Table 7.

Switching times

Symbol Parameter

Test conditions Min.

Typ.Max.Unit

t d(on)t r t d(off)t f

T urn-on delay time Rise time

T urn-off delay time Fall time

V DD = 300 V , I D = 5.5 A R G =4.7 Ω V GS = 10 V (see Figure 18)

-383010

-

ns ns ns ns

Table 8.

Source drain diode

Symbol Parameter

Test conditions

Min Typ.

Max Unit I SD I SDM (1)1.Pulse width limited by safe operating area Source-drain current

Source-drain current (pulsed)-1144A A V SD (2)2.Pulsed: pulse duration = 300 μs, duty cycle 1.5%

Forward on voltage I SD = 11 A, V GS = 0- 1.5

V t rr Q rr I RRM Reverse recovery time Reverse recovery charge Reverse recovery current I SD = 11 A, di/dt = 100 A/μs V DD = 100 V (see Figure 20)

-230218ns μC A t rr Q rr I RRM

Reverse recovery time Reverse recovery charge Reverse recovery current

I SD = 11 A, di/dt = 100 A/μs V DD = 100 V , T j = 150 °C (see Figure 20)

-

29019017ns μC A

STB/D/F/I/P/W13NM60N Electrical characteristics

Doc ID 15420 Rev 37/212.1 Electrical characteristics (curves)

Figure 2.

Safe operating area for TO-220,

Figure 3.Thermal impedance for TO-220,

Electrical characteristics STB/D/F/I/P/W13NM60N

8/21Doc ID 15420 Rev 3

Figure 10.Output characteristics

Figure 11.Transfer characteristics

)$

6$3 6

!

6'3 6

6

6

6

!- V

)$

6'3 6

! 6$3 6

!- V

STB/D/F/I/P/W13NM60N Electrical characteristics

Doc ID 15420 Rev 39/21

Figure 16.Normalized gate threshold voltage

Figure 17.Normalized on resistance vs

Test circuits STB/D/F/I/P/W13NM60N

10/21Doc ID 15420 Rev 3

3 Test circuits

Figure 18.Switching times test circuit for

Figure 19.Gate charge test circuit

Figure 20.Test circuit for inductive load

Figure 21.Unclamped inductive load test

STB/D/F/I/P/W13NM60N Package mechanical data 4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK? packages, depending on their level of environmental compliance. ECOPACK?

specifications, grade definitions and product status are available at: e6ab55b4dd88d0d233d46a65. ECOPACK

is an ST trademark.

Doc ID 15420 Rev 311/21

Package mechanical data STB/D/F/I/P/W13NM60N

Table 9.TO-220FP mechanical data

mm

Dim.

Min.Typ.Max.

A 4.4 4.6

B 2.5 2.7

D 2.5 2.75

E0.450.7

F0.751

F1 1.15 1.70

F2 1.15 1.70

G 4.95 5.2

G1 2.4 2.7

H1010.4

L216

L328.630.6

L49.810.6

L5 2.9 3.6

L615.916.4

L799.3

Dia3 3.2

12/21Doc ID 15420 Rev 3

STB/D/F/I/P/W13NM60N Package mechanical data

Doc ID 15420 Rev 313/21

Package mechanical data STB/D/F/I/P/W13NM60N

14/21Doc ID 15420 Rev 3

STB/D/F/I/P/W13NM60N Package mechanical data

Doc ID 15420 Rev 315/21

Package mechanical data STB/D/F/I/P/W13NM60N

16/21Doc ID 15420 Rev 3

STB/D/F/I/P/W13NM60N Package mechanical data

Doc ID 15420 Rev 317/21

Packaging mechanical data STB/D/F/I/P/W13NM60N

18/21Doc ID 15420 Rev 3

5

Packaging mechanical data

TAPE AND REEL SHIPMENT

DPAK FOOTPRINT

DIM.mm inch MIN.

MAX.MIN.

MAX.A 330

12.992

B 1.50.059

C 12.813.20.5040.520

D 20.20.795G 16.418.40.6450.724N 50

1.968

T

22.40.881

BASE QTY BULK QTY 2500

2500REEL MECHANICAL DATA

DIM.mm inch MIN.MAX.MIN.

MAX.

A0 6.87

0.2670.275B010.410.60.4090.417

B112.10.476

D 1.5 1.60.0590.063D1 1.50.059

E 1.65 1.850.0650.073

F 7.47.60.2910.299K0 2.55 2.750.1000.108P0 3.9 4.10.1530.161P17.98.10.3110.319P2 1.9 2.1

0.0750.082R

40

1.574

W

15.7

16.3

0.618

0.641

TAPE MECHANICAL DATA

All dimensions are in millimeters

STB/D/F/I/P/W13NM60N Packaging mechanical data TAPE MECHANICAL DATA

Doc ID 15420 Rev 319/21

Revision history STB/D/F/I/P/W13NM60N 20/21Doc ID 15420 Rev 36 Revision history

Table 10.

Document revision history Date

Revision Changes

29-Feb-2009

1First release 13-Jan-2010

2–Added new package, mechanical data: TO-247–Added new package, mechanical data: D2P AK 08-Nov-20103–Modified Figure 6

–Added new package, mechanical data: I2P AK

STB/D/F/I/P/W13NM60N

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

? 2010 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

e6ab55b4dd88d0d233d46a65

Doc ID 15420 Rev 321/21

本文来源：https://www.bwwdw.com/article/xt5l.html